Once the local disk is recognized, start the installation. Then click the Load Drivers button and browse to the location of the drivers and install. If you have to do this, remove the WHS 2011 install DVD and swap it with the driver disk. Find the drivers and burn them to disc or put them on a USB drive. Note: If you don’t see the local drive listed, you’ll need to load the drivers for the controller. Check the box that you know the data on the drive will be wiped. Next, select the drive you’re installing WHS 2011 to. Since this is a brand new system, I’m selecting New Installation. The first screen you’ll need to interact with is selecting a New Install or Repair. Next, pop the install DVD you bought into your system’s drive.

You can do this in the BIOS or hit the appropriate key during startup to select a temporary boot device. It varies in price but is well under $100, which is a great thing! If you download the ISO from Microsoft, use Windows 7 Disc Image Burner to create the bootable install DVD.įirst, make sure the system is set to boot from the DVD drive first. Unless you have an MSDN or TechNet subscription, you’ll need to buy a physical copy of WHS 2011. Plus, since you’re going to back up your PCs, store multimedia, photos, and all of your documents on it, you’ll want a good amount of storage.

Of course, these are the minimum specs – so at least double everything. First, unlike its 32-bit predecessor, WHS 2011 is 64-bit only and requires a minimum of a 160 GB hard drive and 1 GB of RAM. Before you begin, there are a few things you need to know.

Windows home server 2007 iso